Home » Canon pixma ip2820 Wireless Setup

Canon pixma ip2820 Wireless Setup

  • by

Setup Canon pixma ip2820 Printer Manually

In this blog we have shared the steps to Canon pixma ip2820 Wireless Setup. We have cleared the setup Canon pixma ip2820 printer process for both wired and wireless connection.

For someone who doesn’t want to get engulfed by tons of technological bugs when printing the document will use the Ip2820 Printer System Canon Pixma. As it is the printer that has the auto-power feature that will make it easy to print in a short time. It’s a special edition printer designed to provide its users with the high quality printing solution.

And if you plan to buy a new printer for your home or office premises, Canon Pixma Printer is the cheapest one you can purchase in your budget. You must know how to configure after buying this printing machine otherwise you would not be able to print any urgent documents. If you have less technical knowledge, and are therefore unable to do so to Setup Canon Pixma Ip2820 Printer Manually by your own,Then give a look at this article without wasting your time. You’ll see the real instructions for doing so here.

After unpacking the iP2820 printer from the box on Canon Pixma, perform the initial installation process to prepare the printer for configuration. Follow the steps given-

  • Hold your iP2820 Canon Pixma printer at a position where you can comfortably handle it.
  • Place the cartridges into the slots you need.
  • Link the printer’s power cable to complete the print setup process.

Canon pixma ip2820 Wireless Setup

To setup Canon Pixma iP2820 printer using wired connection, follow the below steps-

  • Switch your Canon Printer ON first by pressing the Power button
  • Then connect the flat end of the USB cable to the computer or laptop, and the USB cable square end to the printer.
  • Now, in a pop-up window, your machine will show the message “new hardware found”
  • Go to the post and follow the steps to connect the canon printer to the machine.
  • Once the two devices are paired, download the Canon PIXMA iP2820 driver from Canon ‘s website, as per your operating systems.
  • Install the downloaded driver now, and finish the setup. Now your printer’s ready to print.

Hence, this is the complete process of setting up Canon Pixma iP2820 with the aid of a USB cable using wired PC link.

Canon pixma ip2820 Wifi Setup Process

Follow the below steps for Canon Pixma iP2820 printer setup 

  • Turn your Canon printer on first.
  • Test the press power button for the printer. If it appears green, that means the printer is on.
  • After that press the canon printer on the Setup Button
  • Now use the < or > button to select ‘Wireless Lan’ setup option.
  • Now hit the ‘OK’ button.
  • If the blue Wi-Fi lamp is lit, it means the wireless connection is on.
  • Now wait until Canon printer automatically checks for the compatible access points.
  • Now download and install the Canon printers driver as shown above, from the Canon website.
  • Canon Pixma iP2820 printer is finally linked to Wi-Fi and the wireless setup process for Canon Pixma iP2820 is complete.
See also  Canon PIXMA MG5100 Driver Download

Connect Canon pixma ip2820 Printer to Wifi and Wireless Network

You will be able to setup Canon Pixma iP2820 printer using wired or wireless connection by following the troubleshooting steps mentioned in this article. In case you face any problems with printer setup, you can contact us further on our helpline.